Ingat Saya

Lupa Kata Sandi ?

DANFOSS INVERTER MICRO DRIVE 2.2KW FC051
No. Item : SKU2968
Kategori : Electrical / Aksesoris Electrical
Merek : Danfoss
Minimum Pembelian : 1
Rp 7.200.000
Untuk pemesanan silahkan hubungi  021 - 5316 0700
DANFOSS INVERTER MICRO DRIVE 2
Rp 7.200.000

Anda akan menambahkan produk ini ke keranjang belanja.

Quantity :
Alamat :
   Tambah Alamat
Produk Rp 7.200.000
Ongkir : Rp 9.000
Total : Rp 7.209.000
Rekomendasi Produk Sejenis
ISOLASI 3M
Rp 15.000
Entes Pulse Concentrator EPC12
Rp 0
Entes Converter GEM10
Rp 0
Entes Trafo ENS.AYS 816
Rp 0
  • Harga belum termasuk PPN 10%
  • Harga belum termasuk ongkos kirim
  • Garansi tersedia
  • Terbuat dari bahan berkualitas
  • Tidak mudah rusak
  • Original 100%
Dapatkan pengalaman luar biasa belanja keperluan elektrik di rajalistrik.com
Deskripsi
Spesifikasi

Danfoss VLT Micro Drive FC 51 Series AC Frequency Inverter for 2.2kW (3HP) 400V 3 Phase Motor in VxF control to 5.3A.

Includes Keypad with Potentiometer.

Size M2 - 75mm Wide x 175.6mm Deep x 176mm high. IP20.
Weight: 1.6kg.

Overload - 150% x 60 seconds.
Speed Control Range - 0-200 Hz (VVC+), 0-400 Hz (u/f).
Braking: to 157 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

2 x Analogue Inputs, 4 x Digital Inputs, 1 x Digital Input/Pulse Input, 1 x Analogue Output, 1 x Relay Contact set, FC Protocol, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Software

Input Current - 8.5A.
Input Voltage - 380-480V Three Phase ±10% at 50-60Hz.
EMC Filters to IEC/EN 61800-3 2nd Environment (Industrial).

Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 81.5W.
Mounting via 4 x 5mm diameter holes at rear on 59mm x 166.4mm centres

Danfoss VLT Micro Drive FC 51 Series AC Frequency Inverter for 2.2kW (3HP) 400V 3 Phase Motor in VxF control to 5.3A.

Includes Keypad with Potentiometer.

Size M2 - 75mm Wide x 175.6mm Deep x 176mm high. IP20.
Weight: 1.6kg.

Overload - 150% x 60 seconds.
Speed Control Range - 0-200 Hz (VVC+), 0-400 Hz (u/f).
Braking: to 157 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

2 x Analogue Inputs, 4 x Digital Inputs, 1 x Digital Input/Pulse Input, 1 x Analogue Output, 1 x Relay Contact set, FC Protocol, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Software

Input Current - 8.5A.
Input Voltage - 380-480V Three Phase ±10% at 50-60Hz.
EMC Filters to IEC/EN 61800-3 2nd Environment (Industrial).

Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 81.5W.
Mounting via 4 x 5mm diameter holes at rear on 59mm x 166.4mm centres

REKOMENDASI PRODUK SEJENIS
ISOLASI 3M
Rp 15.000
Entes Pulse Concentrator EPC12
Hubungi Kami
Entes Converter GEM10
Hubungi Kami
Entes Trafo ENS.AYS 816
Hubungi Kami
Entes Converter EMG12
Hubungi Kami
CONNECTOR RJ-45 AMP
Rp 2.500